Does Your LCD Image Look the Same from an Angled View? (Part 3) - How the 3M Solution Applies to Your LCD

This forum is for the purpose of providing a place for registered users to comment on and discuss Articles.
Post Reply
Rodolfo
Author
Posts: 755
Joined: Wed Sep 01, 2004 8:46 pm
Location: Lansdowne VA

Does Your LCD Image Look the Same from an Angled View? (Part 3) - How the 3M Solution Applies to Your LCD

Post by Rodolfo »

As covered in detail in parts 1 and 2, for years LCD companies have claimed that their sets can be viewed all the way to 170+ degrees. That number would be like viewing the panel all the way to the side, almost parallel to the edge of the TV frame. Have you actually tried to do that with your set? Do you still see the same image quality if any image at all? Is the image still appealing to you, or you rather move back to the center? Try moving gradually from the center passing the 20 degrees angle to the left or right and keep increasing the angle (20 degrees is about what your companion viewer may be seeing if sitting right by your side). This report (Viewing Angles section) covers more detail about the subject.

Companies like...

Read Article
Post Reply