Page 1 of 1
mitsubishi wd-62527
Posted: Tue Jan 29, 2008 9:31 pm
by jose
I only have blue and yellow. No green or red. Is my lamp bad, if so, shouldn't I get a lamp light warning? First time buyer and I am not sure what is what. I bought t.v. used. Help!
Posted: Tue Jan 29, 2008 10:36 pm
by Richard
It's not like there is an industry standard for these idiot lights, that would be too easy... not sure without looking at the manual...
http://www.mitsubishi-tv.com/j/i/18344/ ... mid=129232
idiot light
Posted: Tue Jan 29, 2008 10:44 pm
by jose
Hey Richard, I guess my question is, do I just need a new lamp? Is there any way of knowing other than spending a few hundred dollars on a new one?
Posted: Wed Jan 30, 2008 7:11 am
by Richard
If the product is telling you need a lamp based on the owners manual lay out of idiot light errors then yes, that is where you start and usually that is what it will be. Call Mitsubishi for a lamp. This is 2005 product so a lamp is clearly in the realm of possibility!
dlp projector problem
Posted: Thu Jan 31, 2008 6:13 am
by palmharbor
The lamp is not an issue of color. The color is a function of the color
wheel in the light engine.
I sell these sets and they are problematic and frequently the home tech
person is unable to repair it. ....despite replacement of parts.
Many sets go bad within 5 months so the customer (Best Buy) gets a new
set.
Quality control is not there on anything chinese. If the set is not assembled
there the parts are.
I think you are at the end.
Posted: Thu Jan 31, 2008 7:08 am
by Richard
?????????????
jose wrote:I only have blue and yellow. No green or red.
Are you talking about your picture or the idiot lights?
Re: mitsubishi wd-62527
Posted: Tue Mar 12, 2013 6:57 am
by marsiano
Jose, did you find a solution to your wd62527 issue? Some of the earlier posts weren't on topic.. for one, there isn't a color wheel in this tv for it is an LCD tv, not a DLP. The helpful post was letting you know that the lamp wouldn't cause a color issue. I am very familiar with the WD62527 and would like to help if you still are having problems. I know the original post was a long time ago, but I just found this web-site.