Mitsubishi DLP RP WD62627 - will not turn on
-
Anonymously Submitted
- HDTV Magazine
- Posts: 70
- Joined: Tue May 20, 2008 5:24 pm
Mitsubishi DLP RP WD62627 - will not turn on
I nave a Mitsubishi DLP WD 62627, it will not turn on. It is not the blinking green light problem. the light does blink for 70 sec after plug in or reset which I understand to be normal operation. After green light stops I get no response from tv when pushing power ,either remote or front keypad nothing,, no relay click, no fan start .nothing..I know part of set is working because if I take lamp door off ,, LED on front will blink amber, which again is normal. lamp is good.. Any help ?? Thanks Scott
-
Richard
- SUPER VIP!
- Posts: 2578
- Joined: Wed Sep 08, 2004 1:28 pm
- Location: Atlanta, GA
- Contact:
It will be difficult to help you without your ability to reply.
The green blinking light is the booting up process just like turning on your PC. After that you press power and the power light should come on. If it doesn't you need to have it serviced.
http://www.tvrepairpros.com
If the power light comes on, but you never get a picture, and it then turns off, it could be your lamp. Removing the door and seeing a light blink on the front only proves that the door detector is working and nothing more. This TV does not have a circuit to determine if you really have a lamp cartridge in there.
TV: Lamp failure and replacement
viewtopic.php?t=10384
The green blinking light is the booting up process just like turning on your PC. After that you press power and the power light should come on. If it doesn't you need to have it serviced.
http://www.tvrepairpros.com
If the power light comes on, but you never get a picture, and it then turns off, it could be your lamp. Removing the door and seeing a light blink on the front only proves that the door detector is working and nothing more. This TV does not have a circuit to determine if you really have a lamp cartridge in there.
TV: Lamp failure and replacement
viewtopic.php?t=10384