Page 2 of 2
Posted: Thu Jun 05, 2008 5:16 pm
by Richard
As noted in the HD Library links...
You should have a INFO or DISPLAY button on the remote and that will tell you what input you are on and the incoming scan rate. Is HDTV showing up as 1080i?
Posted: Fri Jun 13, 2008 3:38 pm
by tomasulo
Thanks for the help guys. Where will I get a DVE disc?? Also, I have emailed Bell ExpressVu, my satellite provider. As far as I know, the HD Receiver that I bought, direct from them, only offers DVI output. That is their latest model, the 6100. They do have an HD-PVR that they push really heavy on ads, maybe that has an HDMI output. If they do have a 6100 with HDMI, I will certainly ask for an exchange. Will let you guys know. When I got the receiver last month, they sent out a service man to replace my dish. It had to be a 20" dish that tilts. Bell has two satellites in the sky, Nimiq 1 and Nimiq 2 (the HD satellite). In Canada, when you buy from Bell or Star Choice, their own programming is all you get, unless you're into the illegal Free-Air dishes that rob signals, and are down more than up. Will let you know what Bell says, and I plan to try my conversion cable again, and tweak the settings if I can get my hands on a calibration DVD.
Posted: Fri Jun 13, 2008 11:27 pm
by Richard
Posted: Sun Jun 15, 2008 4:03 am
by tomasulo
Sorry, yes, when checking the screen on the TV, it says 1080. I also double checked and the HD Satellite Receiver is set at 1080 output. Should I still buy a DVE disc??
Posted: Sun Jun 15, 2008 3:05 pm
by Richard
That is the only way you can figure out what is going on...